What are the economic benefits of an integrated pumping station?

Pumping station has been widely familiar with a noun, almost few people do not know that the integration of the pump station is a collection of a variety of equipment composed of pumping sewage device, that is to say, the water does not flow from the ability to discharge, it is necessary to use it to complete the transmission. The integrated precast pump station is installed on the specified foundation or facility according to the construction and assembly drawings and related installation technical standards. The process of leveling and stabilizing, mechanical assembly and equipment connection, electrical wiring and test, value adjustment and test, local and centralized control simulation test is completed, so that the integrated precast pump station can meet the conditions for trial operation. The inside and outside surface of the cover plate of sewage pump station should be smooth, no cracks with depth of more than 2mm, no delamination, fiber bare, resin nodule, foreign body inclusion, obvious uneven color and other phenomena. For example, in the famous "water diversion from south to North", there are dozens of pump station use cases.

Pumping stations are generally used in sewage, its use in the end what are the benefits? Are there any economic benefits to using an integrated pump station?

First of all, we need to recognize that as a large building, it is characterized by making the city more colorful and is an indispensable infrastructure for the city, but at the same time, it is being used less and less due to the old concrete pump station's old appearance, which cracks the concrete, causing blockage, leakage, unsightly and a certain risk. In contrast, integrated FRP pump stations are widely invested.

At present municipal sewage discharge is now a big problem in our country because there are a lot of buildings that from the beginning don't consider the consequence and don't pay attention to the importance of sewerage. As a result, some sewage that people use in daily life is deposited in low-lying areas, making it impossible for the sewage treatment, which happens around us from time to time.

Careful people will find that this "high incidence of cases", most in large enterprises, living areas, factories, subways, basement and other areas. In short, these places are relatively dense, if the sewage treatment or drainage problems, the consequences will be very serious. It will not only cause great trouble to the normal activities of the surrounding residents, but also make the sewage treatment of the whole city become "chaotic".

For the development of enterprises, the use of economic integration pumping station is one of the effective ways to solve the problem of sewage treatment in these workplaces. This device could be a major improvement in the study of sewage deposition, and at the same time alleviate the problems of flooding caused by rainstorms. As far as water discharge and pumping is concerned, it plays a major role in society.

The working principle of the integrated pump station is a kind of intelligent operation process. It first feedbacks the water level information to the control system through the pressure sensor or float device, and then the control system sets the operating parameters in advance and adjusts the switch of the pump. When the water level reaches the opening level set by the control system, the pump is activated so that sewage can be pumped from the pump station to the municipal sewer outlet, and the pump is stopped when the water level is below the level set by the control system. In this way, the intelligent automatic control of the pump is realized, and the management is no longer "worried".